How-To Install A BedRug Bedliner
Read 126,789 TimesPosted Aug 28, 2006, 7:08 ET by MichaelS
Permalink  |  Print  |  Email to Friend
More in: How-To, Bed & Cargo, Exterior, Ford



Now remove all the backings on the 2" strips and place the bulkhead carpet section against the bed and press over the areas where the hook fasteners are attached.

Click to view fullsize imageClick to view fullsize imageClick to view fullsize image



Click to view fullsize imageNow that you have the bulkhead and floor finished, it is time to move onto the sides and tailgate section. Install the 2" hook fasteners where the indentations are present, and clean the areas they will come into contact with the bed.



Click to view fullsize imageNote in this picture the location of some of the hook fasteners on the side section. Once you have finished both sides of the bed, rub your hand over the areas to make sure the fasteners adhere properly.



Click to view fullsize imageMoving on, you will now need to install 2" fasteners on the "flaps" that go on bed nearest the tailgate.



Once you have completed this step, smooth over the areas to make sure the fasteners have adhered properly.

Click to view fullsize imageClick to view fullsize image


Click to view fullsize image
The tailgate is one of the easiest steps because you are in a natural working position (Standing!). To complete the tailgate section, place the 60" section of fastener to the top of the tailgate. Next, place the 2" strips where indicated by the indentations. Clean the areas where these will adhere to the tailgate and remove the backing. Press down where your fasteners are to make sure they adhere properly.

Once finished with this step, your installation is almost complete!

Click to view fullsize image



If you wish to re-install your tie down hooks, pull back the sections of carpet where the bolt holes are located and hand tighten the bolts in their respective holes. Reattach the BedRug and grab your razor knife. Feel around for the bolt heads and cut a small X incision over the bolt heads. Press on the carpet until the rug goes over the bolts. Do this for all four locations and reattach your tie downs.

Click to view fullsize imageClick to view fullsize image



You are now finished installing your Wise Industries BedRug Bedliner! Take a step back and admire your work and visualize yourself tailgating in style at your next carshow or sporting event!

Click to view fullsize imageClick to view fullsize image



SOURCES:

Wise Industries
info@wiseindustries.com
www.wiseindustries.com
1-800-462-8435
635 Old Hickory Blvd.
P.O. Box 149
Old Hickory, TN 37138
Wise Products at Truck Hownd




Discuss now in our forums: Bed and Cargo   Exterior   Ford

Related Articles

Lightening the Lightning
Diesel Racing - Clash of the Titans
America Loves Trucks: Like we didn't know that!
2004 Ford Explorer Flip Trac
Hybrid News From Ford & GM
New Doors Opening For Ford
Ford to Cut 1,100 CAW Jobs, Eh!
Stepping Up Is Easier Than Ever
Donahoe Racing Raises The Bar Again
Ford Delivers First Hybrid SUV



Truckblog Monthly Newsletter
Subscribe to the Truckblog Monthly Newsletter now to receive
the latest that Truckblog has to offer for your truck and SUV!

CLICK HERE TO SUBSCRIBE NOW!

Please read our Privacy Policy

 
                               
                                       
Please visit our supporting sponsors. Advertise here!