Using the provided allen key, and an 11/32” socket, tighten the hardware to the pedal. Do this for the parking brake, clutch, and brake pedal.



There is no pedal cover over the accelerator pedal, as seen in this photo, so do not attempt to remove the pedal itself, as it is integrated into the pedal arm. Use the self-tapping screws to mount the accelerator pedal cover.



Hold the smooth accelerator pedal cover to plastic cover. Use it as a template, and drill 1/8” pilot holes for the mounting screws. Screw in the 4 screws used to hold the cover in place. This pedal is smooth so your shoe can slide over the surface, for safety reasons.