Check alignment of tailpipes and tips. Make sure that there is at least one inch of clearance between the tips and the bottom of the bumper. Adjust tailpipes at slip joints as neccessary.





Starting with the double bolt clamp tighten all TORCA clamps checking to make sure clamps are positioned and tightened.
Clamp Torque Setting: 45 ft.-lbs



It is MANDATORY that all clamps be checked and retightened if necessary after road testing the vehicle. Allow the system to cool before retightening.

NOTE: During cold weather start-ups, you may experience an exhaust sound that is deeper and louder in tone than usual. This is temporary and will diminish to normal levels once your engine has reached its normal operating temperature.

NOTE: Immediately following the installation of your CORSA exhaust sytem, you may experience a trace of smoke after initial start-up. DO NOT be alarmed. The smoke is caused by the burning of a small amount of forming oil residue used in the manufacturing process.








Drive-by Video

Watch the drive-by video!

SOURCES: Corsa Performance sales@corsaperf.com www.corsaperf.com 1-800-486-0999 140 Blaze Industrial Parkway Berea, OH 44017