Blogs: 0 (Add) Vehicle: 99 F350 DRW & 07 F150 FX4 Joined: May 2008 Member # 4468 From: Edinburg Texas
Posted - July 24 : 11:24p
1) Can the upfitter switches and tray piece be installed on a 99-04 SD?
2)If the install can not be made to fit in the 99-04 cubby, Is the install of a lower dash from an 05-07 straight forward?
3) Back to an upfitter question, I believe that I read that in the harness of the / for the upfitter switches, I can cut of the pigtail that connects into the OEM truck fuse block and wire the six wires into a keyed ignition source....am I correct??
Blogs: 0 (Add) Vehicle: 2005 F350 4x4 Diesel Joined: Dec 2006 Member # 1754 From: Macedon NY Visit Gallery
Posted
- July 25 : 8:00a
I believe you have to swap the dash piece. Unless you want to be crafty and try and trim the pocket out. And you should be able to wire them in without the pigtail.
Blogs: 0 (Add) Vehicle: 99 F350 DRW & 07 F150 FX4 Joined: May 2008 Member # 4468 From: Edinburg Texas
Posted
- July 27 : 2:58a
thanks...looks like thats what I'm gonna do, just get the whole dash piece, it wasn't too bad at all, about 120 total w/o cupholder and about 90 for the whole switch kit
Upfitter Switches ?'s
Posted - July 24 : 11:24p
