|
DONALDAD1
Member
Blogs: 0 (Add)
Vehicle: 1990 CHVY S10 4CLY., 2WD
Joined: Mar 2008
Member # 4339
|
|
Greez Lightning
Photographer
Premium Member
Blogs: 0 (Add)
Vehicle: 2001 Ford Lightning
Joined: May 2005
Member # 7
From: Santa Clarit CA
Visit Gallery
|
 Posted
- March 31 : 9:42a
| The oil in the air cleaner might suggest you have bad rings. Id check your compression.
The other thing that might be happening which seems more likely is your running very rich. That is why you have to put it to the floor to get it to start. That would also cause oil in your air cleaner as the truck is so rich you have gas washing past the rings and they are letting oil through. This can also cause your rings to loose seat. Smell your oil on your dipstick and see if you smell gas in it.
I would do a leak down test also. Plus you should get it on the dyno to see what your fuel air ratio is. That will tell you a lot. |
Edited by - Greez Lightning on March 31 9:48a |
|
Too much fuel
