|
fast_13
Noob
Blogs: 0 (Add)
Joined: Jul 2007
Member # 3178
|
|
Greez Lightning
Photographer
Premium Member
Blogs: 0 (Add)
Vehicle: 2001 Ford Lightning
Joined: May 2005
Member # 7
From: Santa Clarit CA
Visit Gallery
|
 Posted
- July 20 2007 : 4:35p
| I haven't really seen these so I don't know exactly where they break from the stock exhaust.
But look at them carefully. Because if they come off too close to the exhaust manifold you will experience a noticeable loss of torque. They will only produce more Horse Power at the high end of each gear when the RPM's are very high. They might even slow the truck down over the quarter mile as you need back pressure for torque.
So when building an exhaust you want to divide the performance of Torque and HP with a little back pressure.
But if you just want them for sound purposes then they would be pretty cool. |
Edited by - Greez Lightning on July 20 2007 4:59p |
|
race ready performance exhaust cut-outs
