Truckblog - 4.6 question

Username:	Password:
Save Password
Forgot your Password?

All Forums

Truck Related

Exhaust Systems

4.6 question

Reply • Active • New Topic • Print

Author

Message

milkbone
Member

Blogs: 0 (Add)
Vehicle: '71 Ford 8000
Joined: Aug 2006
Member # 1124
From: here Wisconsin

Posted - September 3 2006 : 5:04p

Was looking at the instructions for installing my headers and they said I need to raise the engine up off the mounts some to get the manifolds off and the headers in....anyone here ever try this upgrade on their own? I don't really want to wrence anything I get avoid....and I'm also one of those who are afraid to mess with the later engine models. Oh, this is in a '97 F150 4x4.

Check out the latest parts and accessories from Truck Hownd

Large Dual Hood Vents

by Lund International

Ready-to-Run Pro-Billet Ford Distributor

by MSD Ignition

HE828 CHAMBER

by Helo Wheels

Spine

by DUB Wheels

SCRWDRVR
Turbocharged Member

Blogs: 1 (View)
Vehicle: 05 F150 86 F150
Joined: Jun 2006
Member # 849
From: Chesapeake City Maryland
Visit Gallery

Posted - September 3 2006 : 5:27p

Ive never put headers on one but I'm betting it they say you need to raise the motor you will have to. You may have to take your fan sroud of also to let the fan raise high enough.

Tom in Tacoma
Moderator

Premium Member

Blogs: 0 (Add)
Vehicle: Truck? What truck?
Joined: May 2005
Member # 9
From: Over yonder WA
Visit Gallery

Posted - September 3 2006 : 7:10p

If they're telling you'll need to - count on needing to.

Rather than taking the fan shroud off (that also means removing the fan), just loosen the shroud so that it can move upward with the engine.

You might also want to remove the fender liners and front wheels so you can reach through there and work on the manifolds and headers.

water spider
Supercharged Member

Premium Member

Blogs: 2 (View)
Vehicle: 2000 Lightning
Joined: Sep 2005
Member # 275
From: New Orleans LA.
Visit Gallery

Posted - September 3 2006 : 9:55p

You really don't have to but it makes it a litter easier. If you deside to raise the motor will only have to raise it about half inch to 1 inch.

Bryan (water spider)

Message

Reply • Active • New Topic • Print